SMART RELAY 3063
?? ?The digital Smart Relay 3063?fulfills?the function of an access control reader or a key-operated?switch. In the System 3060 it opens electrically operated doors, gates and barriers, and switches?lights, heating and machinery on and off. It passes transponder data on to external systems – e.g.,?time & attendance systems, cafeteria billing and facility management. The typical scanning range?is up to 47.24 inches (120 cm).
PRODUCT VERSIONS:
- Basic version with integrated antenna, flip-flop function, repeater function. This version?enables a pure YES-NO authorization for a max. of 8,187 different transponders.
- ZK (audit trail) version: like the basic version, but with separately activated audit trail for the?1,024 most recent operations (from firmware version 4.0.01.15) with date and time or?daytime zones for up to five groups of people, automatic locking and unlocking.
- Smart Relay Advanced: version with integrated antenna, audit trail and time zone management,?serial port for connecting an external time & attendance terminal or access control?reader, bus compatible for the connection of external modules, connection for an external?antenna, connection for external LED/buzzer, flip-flop function, repeater function.
TECHNICAL SPECIFICATIONS:
- Casing made from black plastic.
- Dimensions: 2.83 x 2.19 x 0.99 inches (71.8 x 55.4 x 25.1 mm) (H x W x L).
- Degree of protection: IP 20, not suitable for outdoor use.
- Temperature range: operation at 32°F to 104°F (0 °C to 40 °C), storage at -7.6°F up to 131°F (–22 °C to 55 °C).
- Humidity: < 95 % without condensation.
- Dimensions of PCB: 1.97 x 1.97 x 0.55 inches (50 x 50 x 14 mm) (H x W x L)
- Power supply: 12 VAC or 9-24 VDC (no reverse voltage protection).
- Power limitation: power supply must be limited to 15 VA.
- No-load current: < 5 mA.
- Max. current: < 100 mA.
- Pulse duration programmable from 0.1 to 25.5 seconds
- Optional battery operation possible.
TECHNICAL SPECIFICATIONS OF OUTPUT RELAY:
- Type: two-way switch.
- Permanent current: max. 1.0 A.
- Switch-on current: max. 2.0 A.
- Switching voltage: max. 24 V.
- Switching capacity: 106 activations at 24 VA.
- Multi-function connections F1, F2, F3: max. 24 VDC, max. 50 mA.
- Vibration: 15 G for 11 ms, 6 shocks to IEC 68-2-27, not approved for use under permanent vibration.
SMART OUTPUT MODULE
?? ?The Smart Output Module has 8 potential-free relay outputs and is connected to the Smart Relay Advanced. It allows functions such as controlled access of an elevator for various floors.
TECHNICAL SPECIFICATIONS:
- Casing made from green plastic.
- Dimensions: 2.95 x 2.95 x 2.09 inches (75 x 75 x 53 mm) (H x W x L).
- Degree of protection: IP 20, not suitable for outdoor use.
- Temperature: operation at 32°F to 140°F (0 °C to 60 °C), storage at 32°F to 158°F (0 °C to 70 °C).
- Air humidity: < 90% without condensation.
- Power supply voltage: 11 to 15 VDC, recommended 12 VDC, stabilized
- Power limitation: power supply must be limited to 15 VA.
- No-load current: < 120 mA.
- Max. current: < 150 mA.
- Pulse duration programmable from 0.1 to 25.5 seconds
- Output relay type: normally closed.
- Output relay and AUX relay permanent current: max. 1.0 A.
- Output relay and AUX relay switch-on current: max. 2.0 A.
- Output relay and AUX relay switching voltage: max. 24 V.
- Output relay switching capacity: 106 activations at 24 VA.
- Vibration: 15 G for 11 ms, 6 shocks to IEC 68-2-27.
- Output 1 switching current: max. 1 A.
- Output 1 switching voltage: max. 24 V.
- Output 1 switching capacity: max. 24 VA.
- Output 1 switching behavior when voltage drops too low: Uv < 10.5 +/- 0.5 V.
|
|
